Along the same lines as with the pneumatic models, the machine is made up of a pendular parallelogram being balanced by an air spring plus a radial arm. The assembly being made up of both members fixes the motor head and keeps it in a position being perpendicular to the working area. The motor speed, the tool automatic lubrication control and the depth control can be adjusted by means of a display placed on the cover of the electronic board case. A set of 6 reducer modules are apt to be fitted to the motor output by means of a quick-change system and allow to adjust the tapping speed as a function of the metric pitch to mechanise. Said modules incorporate as well a quick-change system being apt to receive the tap holder with or without safety clutch.

A range of 6 modules (speed reducers) can be coupled to the quick-change of the motor thus make available 6 different tool rotational speeds.

The ROSCAMAT 9001 VH is supplied with an articulated head of easy handling which allows us to turn the motor in vertical or horizontal position (0º - 90º) and work in both positions.

We can increase the working area in 100 mm in order to work on different height levels

A wide range of tapholders, all of them with or without clutch, apart from other quick holding fixture for different tools, such as drills, sinking tools, threading dies, socket wrenches, etc. are available. Tapholder with safety clutch so that it slips when it reaches the hole bottom. Type 1 Ø19 mm: capacity range M2-M16 (for modules 900, 500, 320) Type 2 Ø31 mm: capacity range M6-M30 (for modules 140 & 75) Type 3 Ø48 mm: capacity range M14-M42 (for module 40) Tapholder without safety clutch for holding different tools with cylindrical shank and driving cube. Type 1 Ø19 mm: capacity range M2-M16 (for modules 900, 500, 320) Type 2 Ø31 mm: capacity range M6-M30 (for modules 140 & 75) Type 3 Ø48 mm: capacity range M14-M42 (for module 40)

Inside the arm, the cutting oil reservoir is located and used to lubricate the tool during the tapping operation. The lubrication time is adjusted by means of a display control placed on the cover of the electronic board case

High Frequency Electric Motor: Power: 1000 W. Max.Torque: 340 Nm (40 rpm) Power supply: Single Phase 220 - 240 V 50/60 Hz. Highest speed: 900 rpm

Roscamat 9001 Radius:1215 mm. Height: 635 (810)mm. Roscamat 9001 VH Radius: 1215 mm Height: 635 (810)