MOSQUITO - Tapping Capacity M2-M14 (M16)

The machine itself consists of a radial arm joint to a tilting arm balanced by means of a pneumatic spring. The head member and the electric motor find themselves at the end of the tilitng arm and is to adapt to always move at right angle with respect to its working area. The "high frequency" is regulated by menas a variator board located in the "electronic box casing". The turning motor and the optional automatic lubrication control are adjustable by menas of the buttons being located over the "radial arm". The speed can be thus adapted to every thread type. The tapholders are fixed to the motor by means of a quick cahnge, and taps fixes directly to the tapholders. 

 

Motor

Speed (rpm)

Max. Torque

(Nm)

Æ Coupl..

Max. Thread Aluminium

Max. Thread Steel <100 Kg

AF220301

300

36

Æ19

M16

M14

AF220201

600

17

Æ19

M12

M10

AF220101

300 / 600

36

Æ19

M16

M14

Electric motor

High Frequency Electric Motor: 3 models with different speeds: a)300 rpm b) 600 rpm c) 300/600 rpmPower: 550 W. Power supply Single -phase 220 - 240 V a 50/60 Hz.

MOSQUITO VH - Orientable headmember

The MOSQUITO VH can be supplied with an articulated headmember of easy handling that can be set in 4 different positions (0 -a 90º) yand work in both directions

Automatic tap lubrication (OPTIONAL)

Inside the arm, the cutting oil reservoir is located and used to lubricate the tool during the tapping operation. The lubrication time is adjusted by means of a display control placed on the cover of the electronic board case.

Working Area

Mosquito: Radius 767 mm. Height: 396 (120)

Mosquito VH: Radius 885 mm Height: 396 (120)

Accessories
Tapholders diam.19/1 with clutch M2-M16 (unit)
Tapholders diam.19/1 without clutch M3-M16 (unit)
Dieholder M5-M12 19/1 (unit/size)
Long dieholder M6-M12 19/1 (unit/size)
Quick change extension
Reducer cup 19-13
Clamp
Clamp
Table 500x500
Table 700x700
Table 850x850
Table 1100x850
Trolley
Column
Pneumatic lifter
Mechanic lifter
Magnetic support (Ø200)
Magnetic support (Ø250)
Arm extension support (1 m.)
ELECTRIC MACHINES
copyright
© 2003 · ROSCAMAT
Tecnospiro Machine Tool, SL
Developed by Virtual Labs - v5.0

   
location
Pol. Ind. Pla dels Vinyats I, s/n, Nau 1
08250 Sant Joan de Vilatorrada
Barcelona · España
E-mail: comercial@tecnospiromt.com
E-mail: roscamat@roscamat.com
phone
(+34) 938 764 359
fax (+34) 938 767 738
domain